The Big Comets


Postby rditz » Wed Nov 01, 2006 3:12 pm

Recently purchased a Flowmaster exhaust kit that basicall goes from the headers back to chrome tips. a real nice setup and reasonably priced... The kit i bought was for a '66 Fairlane. first thing i noticed is that the tips don't make it all the way out the back. second thing was that the front of the H pipe doesn't line up with the headers...

1) how much longer is the Comet trunk than the Fairlane???
2) has anyone tried a flowmaster H pipe on headers??

I am having to modify the setup a bit, which doesn't bother me, i was more surprised then anything....

Posts: 186
Joined: Thu Jun 29, 2006 7:42 am
Location: Lindsay, Ontario

Postby 66 Cyclone » Thu Nov 09, 2006 5:06 pm


I've not used the flowmaster X pipes but you can determine the proper spot to install them by a simple method.

Take a crayon and draw a line down your exhuast pipes. Start your engine and get it to operating temp. Where the crayon hasn't melted off is where the pipe should be welded in.

'66 Cyclone GT
66 Cyclone
Posts: 4
Joined: Thu Nov 09, 2006 5:03 pm
Location: Anchorage, Alaska

Return to 66 - 69 Comets

Who is online

Users browsing this forum: No registered users and 1 guest