66 Engine to Fire Wall Ground

The Big Comets
Post Reply
Lakeview
Posts: 46
Joined: Sun Jan 22, 2012 12:55 pm

66 Engine to Fire Wall Ground

Post by Lakeview »

Does anyone know the correct connection points for a 66 big block fire wall to engine block ground cable.

Comechero65
Posts: 1870
Joined: Wed Mar 12, 2014 10:37 pm
Location: Santa Clara, Ca

Re: 66 Engine to Fire Wall Ground

Post by Comechero65 »

Don't know where they should be on a 66 comet but early falcons and up through 66 mustangs have a ground cable between rear of the pass side head and the firewall next to the heater.
Ron
Image

User avatar
Ojohnny
Posts: 280
Joined: Sat Sep 04, 2010 10:05 am
Location: Springfield MO

Re: 66 Engine to Fire Wall Ground

Post by Ojohnny »

My 66 is no big block but it is on the rear passenger side head accessory hole closest to the fender and to the firewall.

Lakeview
Posts: 46
Joined: Sun Jan 22, 2012 12:55 pm

Re: 66 Engine to Fire Wall Ground

Post by Lakeview »

Any chance you could post a picture of the two locations

User avatar
Ojohnny
Posts: 280
Joined: Sat Sep 04, 2010 10:05 am
Location: Springfield MO

Re: 66 Engine to Fire Wall Ground

Post by Ojohnny »

Sure, be this evening before I can get it done.

User avatar
Ojohnny
Posts: 280
Joined: Sat Sep 04, 2010 10:05 am
Location: Springfield MO

Re: 66 Engine to Fire Wall Ground

Post by Ojohnny »

Image
Best I can do in the dark, let me know if you need something better. That's a mustang ground cable from either CJ Pony or Scott Carpenter.

Lip Ripper
Posts: 1870
Joined: Wed Jun 06, 2012 6:47 am
Location: Lake Placid, Florida

Re: 66 Engine to Fire Wall Ground

Post by Lip Ripper »

I believe my FE has the ground strap on the bell housing bolt that holds the tranny dipstick.

Stacey
66 Cyclone GT; 245/60R15's on 15x8's and 215/70R15's on 15x7 Magnum's.
There's nothing like the sound of a pushrod V8 singing at the top of her lung's.

Post Reply