1966 Convertible Top frame
1966 Convertible Top frame
Does anyone know if the convertible top frame on a 1966 comet is the same as a 1966 galaxie.
Re: 1966 Convertible Top frame
I don't know but a Galaxie in much wider and the windshield area would be different I'd think.
I'd rather do it myself if it's done right or not,,,isn't that what hotrodding is all about
-
Lip Ripper
- Posts: 1870
- Joined: Wed Jun 06, 2012 6:47 am
- Location: Lake Placid, Florida
Re: 1966 Convertible Top frame
Do you need frame parts for a 66 Comet? I have a spare.
66 Cyclone GT; 245/60R15's on 15x8's and 215/70R15's on 15x7 Magnum's.
There's nothing like the sound of a pushrod V8 singing at the top of her lung's.
There's nothing like the sound of a pushrod V8 singing at the top of her lung's.
-
Halleyscomet
- Posts: 8
- Joined: Mon Nov 02, 2015 8:52 pm
Re: 1966 Convertible Top frame
Looking for convertible top frame parts for my 66 cyclone gt that's been in a barn the past 42 years. Also for back seats in decent condition.
Any help on this long road to restoration would be greatly appreciated. I do have a couple parts cars and might have parts for somebody also.
Any help on this long road to restoration would be greatly appreciated. I do have a couple parts cars and might have parts for somebody also.
-
Lip Ripper
- Posts: 1870
- Joined: Wed Jun 06, 2012 6:47 am
- Location: Lake Placid, Florida
Re: 1966 Convertible Top frame
I have a spare that is mostly complete. Location is Lake Placid, Fl.
66 Cyclone GT; 245/60R15's on 15x8's and 215/70R15's on 15x7 Magnum's.
There's nothing like the sound of a pushrod V8 singing at the top of her lung's.
There's nothing like the sound of a pushrod V8 singing at the top of her lung's.
-
Halleyscomet
- Posts: 8
- Joined: Mon Nov 02, 2015 8:52 pm
Re: 1966 Convertible Top frame
I'm looking for 66 cyclone convertible top frame parts.
-
Halleyscomet
- Posts: 8
- Joined: Mon Nov 02, 2015 8:52 pm
Re: 1966 Convertible Top frame
Are you willing to sell any parts from your spare top frame?
-
Lip Ripper
- Posts: 1870
- Joined: Wed Jun 06, 2012 6:47 am
- Location: Lake Placid, Florida
Re: 1966 Convertible Top frame
What do you need? I'll see if I have it.
66 Cyclone GT; 245/60R15's on 15x8's and 215/70R15's on 15x7 Magnum's.
There's nothing like the sound of a pushrod V8 singing at the top of her lung's.
There's nothing like the sound of a pushrod V8 singing at the top of her lung's.
-
Halleyscomet
- Posts: 8
- Joined: Mon Nov 02, 2015 8:52 pm
Re: 1966 Convertible Top frame
I need the right rear arm that lays up against the rear edge of the quarter window. It will have a ford PN on it.
Thanks
Kelly
Thanks
Kelly
-
Lip Ripper
- Posts: 1870
- Joined: Wed Jun 06, 2012 6:47 am
- Location: Lake Placid, Florida
Re: 1966 Convertible Top frame
Can you show me a picture?
66 Cyclone GT; 245/60R15's on 15x8's and 215/70R15's on 15x7 Magnum's.
There's nothing like the sound of a pushrod V8 singing at the top of her lung's.
There's nothing like the sound of a pushrod V8 singing at the top of her lung's.
-
Halleyscomet
- Posts: 8
- Joined: Mon Nov 02, 2015 8:52 pm
Re: 1966 Convertible Top frame
Let me figure out how to ad a photo, I'm new to this site and how it functions.