Wanted: 64/65/66 Fender to Apron Brace (Both Sides)

If you need something, post it here

Wanted: 64/65/66 Fender to Apron Brace (Both Sides)

Postby kevinshi » Tue May 07, 2019 7:32 pm

Updated: My earlier post (below) indicated that I need only the passenger side... well it turns out I need the drivers side as well...

----------

I am seeking the passenger (RH) side "Front Fender to Front Fender Apron & Radiator Support Brace" as seen in the below picture (part number C4DZ-16A023-A).

I know this part appeared on the 64 Falcon as well as the 65 & 66 Comet. I suspect it also appeared on the sibling model/years (e.g. on all of the 64-66 Falcons and Comets).

I've been trolling ebay for quite some time hoping one of these might appear but I've not had any luck... I think I need to find a kind soul out there that has a parts car they are willing to scavenge for me... ;-)

Thanks in advance!

Image
Last edited by kevinshi on Fri May 24, 2019 3:26 pm, edited 1 time in total.
Thanks,
kevin
65 Caliente Convertible
5H25A525287
User avatar
kevinshi
 
Posts: 80
Joined: Wed Jul 16, 2014 11:56 pm
Location: Bellevue, WA

Re: Wanted: 64/65/66 Fender to Apron Brace (Passenger Side)

Postby lavron » Tue May 07, 2019 8:13 pm

I may or may not have what you are looking for, I will look tomorrow, I just cut my core support out of the parts car and the right side had two braces attached to it, one has the end cut off one does not, I am afraid the cut one is what you need, if I have it it is yours.

See Ya,
Mike
64 Comet 202 Sedan, My first car, I have owned it since 1979!
Image
Restoration/Upgrade on a BUDGET - Working on; 250-6, T-5, 8.8 LSD, MII, Air Ride - Whatever I do it will be awesome!
User avatar
lavron
Site Admin
 
Posts: 3457
Joined: Sat Nov 01, 2003 8:17 am
Location: Missouri, Ozarks way North

Re: Wanted: 64/65/66 Fender to Apron Brace (Passenger Side)

Postby kevinshi » Tue May 07, 2019 9:58 pm

Super!
Thanks,
kevin
65 Caliente Convertible
5H25A525287
User avatar
kevinshi
 
Posts: 80
Joined: Wed Jul 16, 2014 11:56 pm
Location: Bellevue, WA

Re: Wanted: 64/65/66 Fender to Apron Brace (Passenger Side)

Postby lavron » Tue May 07, 2019 10:31 pm

I may have told you completely wrong I looked at this picture and it is on the drivers side, not sure why I thought it was the other one.
Image

I think it is the correct brace but wrong side, do you know if they are the same? I can compare it with what is on my car and see.

As to your other post I have a sedan bench seat in the parts car, if any of it will work I can try and take it off for you, I will try and get a picture, I am sure it would need cleaned up.

See Ya,
Mike
64 Comet 202 Sedan, My first car, I have owned it since 1979!
Image
Restoration/Upgrade on a BUDGET - Working on; 250-6, T-5, 8.8 LSD, MII, Air Ride - Whatever I do it will be awesome!
User avatar
lavron
Site Admin
 
Posts: 3457
Joined: Sat Nov 01, 2003 8:17 am
Location: Missouri, Ozarks way North

Re: Wanted: 64/65/66 Fender to Apron Brace (Passenger Side)

Postby kevinshi » Wed May 08, 2019 7:12 am

Sadly they are NOT the same. :-(. Thanks for checking!

YES I am interested in sedan seat hardware!
Thanks,
kevin
65 Caliente Convertible
5H25A525287
User avatar
kevinshi
 
Posts: 80
Joined: Wed Jul 16, 2014 11:56 pm
Location: Bellevue, WA

Re: Wanted: 64/65/66 Fender to Apron Brace (Passenger Side)

Postby comethead » Wed May 08, 2019 4:18 pm

I believe I have one. I will check ASAP.

Joe
1965 Caliente HT- 289/4 speed
1964 Falcon HT- Road Race project. 302/4 speed
Image
comethead
 
Posts: 5039
Joined: Sun Nov 09, 2003 6:44 pm
Location: Palmdale, CA

Re: Wanted: 64/65/66 Fender to Apron Brace (Passenger Side)

Postby kevinshi » Thu May 09, 2019 10:05 pm

comethead wrote:I believe I have one. I will check ASAP.

Super... fingers crossed...
Thanks,
kevin
65 Caliente Convertible
5H25A525287
User avatar
kevinshi
 
Posts: 80
Joined: Wed Jul 16, 2014 11:56 pm
Location: Bellevue, WA

Re: Wanted: 64/65/66 Fender to Apron Brace (Both Sides)

Postby Lige66 » Sun Aug 04, 2019 5:20 pm

Lige66 here.
The 1966 CAPRI FENDER APRON BEACES ARE THE SAME. COLLINS AUTO SAVAGE,COFFEEVILLE, IS.
HAS BOTH OF THEM.ALSO,TRY PURKEYS,,COFFEEVILLE.
Lige66
 
Posts: 2
Joined: Sun Jul 14, 2019 5:51 pm

Re: Wanted: 64/65/66 Fender to Apron Brace (Both Sides)

Postby poboyjo65 » Sun Aug 04, 2019 9:42 pm

Did you find one? I noticed I had one the other day but couldn't remember where or who said they needed it. not sure which side I had or if it is the correct one but I had tape on it & marked for where it goes, I just cant remember what it said. let me know if you still need it & I'll get pics .
Image
347, 4sp, 9''
poboyjo65
 
Posts: 5421
Joined: Thu Oct 20, 2011 7:40 pm
Location: Camden, Tenn.

Re: Wanted: 64/65/66 Fender to Apron Brace (Both Sides)

Postby poboyjo65 » Mon Aug 12, 2019 5:11 pm

I have the driver side,rusty but solid;

Image
Image

let me know if you still need it

.
Image
347, 4sp, 9''
poboyjo65
 
Posts: 5421
Joined: Thu Oct 20, 2011 7:40 pm
Location: Camden, Tenn.

Re: Wanted: 64/65/66 Fender to Apron Brace (Both Sides)

Postby kevinshi » Fri Aug 16, 2019 1:55 pm

Many thanks but I did find a pair already - I appreciate the follow up!
Thanks,
kevin
65 Caliente Convertible
5H25A525287
User avatar
kevinshi
 
Posts: 80
Joined: Wed Jul 16, 2014 11:56 pm
Location: Bellevue, WA


Return to Wanted

Who is online

Users browsing this forum: No registered users and 1 guest