65 Headlight trim ring
65 Headlight trim ring
Would anyone have a couple headlight trim rings for a 65 Comet. Any help appreciated.
Thanks
Thanks
-
- Posts: 272
- Joined: Tue Mar 31, 2015 2:36 pm
Re: 65 Headlight trim ring
I did a quick search for the trim rings online and found some for $6.18 each
Ar restoration parts source.com http://restorationpartssource.com/cgi-r ... e1f85c54e8
Try to cut and paste the link or search,lolls
Ar restoration parts source.com http://restorationpartssource.com/cgi-r ... e1f85c54e8
Try to cut and paste the link or search,lolls
Re: 65 Headlight trim ring
If the image on that link is what they have it wont fit a 65. the image has 3 tabs. 65 rings only have 2 tabs, one with a round hole for the spring, & a rectangular hole on the opposite side of the ring to hook on the headlight bucket tab. they are most likely a one year only ring.Kingspeedy2 wrote:I did a quick search for the trim rings online and found some for $6.18 each
Ar restoration parts source.com http://restorationpartssource.com/cgi-r ... e1f85c54e8
Try to cut and paste the link or search,lolls
-
- Posts: 503
- Joined: Sat Dec 28, 2013 12:10 pm
- Location: Caseville, Michigan
Re: 65 Headlight trim ring
Poboy is right on,my 1965 has 2 tabs and a hole for the spring along with a small spot weld that holds the ring together which will break very easily after age. I drilled a very small hole and the smallest pop rivet to put it back together. I can't remember if the uppers were different from the lower headlights. Maybe Poboy will know. Andy
Re: 65 Headlight trim ring
They're the same as bottoms Andy. & you are right they do break easy,as do the tabs on the buckets.& the buckets are different, all four are different, & have stamped markings to identify. be gentle with all of it,I dont think any are reproduced!!caseville cyclone wrote:Poboy is right on,my 1965 has 2 tabs and a hole for the spring along with a small spot weld that holds the ring together which will break very easily after age. I drilled a very small hole and the smallest pop rivet to put it back together. I can't remember if the uppers were different from the lower headlights. Maybe Poboy will know. Andy
Re: 65 Headlight trim ring
Thanks guys you are right there is only 2 tabs I couldnt find new ones anywhere I am going to try and JB weld the 2 together that I have noe. I did get a pm from a member who may have a couple.
Thanks guys
Thanks guys
-
- Posts: 272
- Joined: Tue Mar 31, 2015 2:36 pm
Re: 65 Headlight trim ring
Ok all, I let Fair67 down,my selection of extra headlamp rings I thought I had is no better than his so the hunt is still on for em!
-
- Posts: 88
- Joined: Tue Aug 05, 2014 7:12 pm
Re: 65 Headlight trim ring
I have several of the headlight rings out of a 65 let me know what you need my cell is 660 287 1129 Thanks Kris
Re: 65 Headlight trim ring
Here are some NOS ones, & according to the description fit a 66 fairlane as well as 65 comet. they look right for 65 comet. kinda high but probably not as brittle as a used one.
https://www.ebay.com/itm/NOS-1965-1966- ... oQ&vxp=mtr
seems like 67 fairlane should if 66 does?
https://www.ebay.com/itm/NOS-1965-1966- ... oQ&vxp=mtr
seems like 67 fairlane should if 66 does?
-
- Posts: 1870
- Joined: Wed Jun 06, 2012 6:47 am
- Location: Lake Placid, Florida
Re: 65 Headlight trim ring
Last year, when I saw what they were selling for I decided my extras are staying on the shelf.
66 Cyclone GT; 245/60R15's on 15x8's and 215/70R15's on 15x7 Magnum's.
There's nothing like the sound of a pushrod V8 singing at the top of her lung's.
There's nothing like the sound of a pushrod V8 singing at the top of her lung's.
Re: 65 Headlight trim ring
Thank you everyone I have managed to get the ones I have to work. I appreciate all the help and hopefully the JB weld will keep on holding.
Thanks
Thanks