Vacuum gauge hook up for the 200
Vacuum gauge hook up for the 200
Hey guys, where can I attach the line for a vacuum gauge on the 200? I'm looking and feeling lost. Thanks!
- 1964Comet404
- Posts: 51
- Joined: Mon Jul 08, 2013 9:56 pm
- Location: upstate, ny - owego (not to be confused with "oswego")
- Contact:
Re: Vacuum gauge hook up for the 200
I just happen to be doing one too. I have a '64 Comet with the 200. I was thinking about mounting mine near the top center of the Fire Wall. There's a wire harness going along the top of the fire wall and I'll mount it beneath that. I'm going to make a bracket for it. I also have a "Mile-O-Meter" from 1951 that I'm going to mount on the dash. It's real cool! It operates by vacuum and has guages on the front for MPG, and Engine performance... got it on Ebay, brand new in the box. As you drive, it shows you how efficient your driving is. You have to keep it in the Green for best MPG. On my car the vacuum line comes out of the carb and goes to the brake booster... or vice versa...Tristan wrote:Hey guys, where can I attach the line for a vacuum gauge on the 200? I'm looking and feeling lost. Thanks!
have fun!
john b.
john v. b.
"If it aint' broke... Drive It!" ~ me
"You cannot do a kindness too soon, for you never know how soon it will be too late." - Ralph Waldo Emerson
"If it aint' broke... Drive It!" ~ me
"You cannot do a kindness too soon, for you never know how soon it will be too late." - Ralph Waldo Emerson
-
- Posts: 140
- Joined: Sat Sep 21, 2013 8:46 pm
- Location: Chesapeake, VA
Re: Vacuum gauge hook up for the 200
That mile-o-meter gauge sounds neat. I haven't seen one at any car show I've been to. I drove a uhaul truck that had one installed but it was hard to keep it in the green!
Show us some pic's when you get it installed.
Matt
Show us some pic's when you get it installed.
Matt
1965 Comet Caliente Convertible
5H25T582252
5H25T582252
-
- Posts: 140
- Joined: Sat Sep 21, 2013 8:46 pm
- Location: Chesapeake, VA
Re: Vacuum gauge hook up for the 200
John B.,
Any luck installing that economy gauge?
Matt
Any luck installing that economy gauge?
Matt
1965 Comet Caliente Convertible
5H25T582252
5H25T582252
Re: Vacuum gauge hook up for the 200
I still haven't figured up where to hook up my vacuum gauge.
Re: Vacuum gauge hook up for the 200
Tristan,
Do you mean where to install the vacuum pickup end or where to mount the gauge (to the dash or firewall)?
There should be a port somewhere on the intake manifold for connection of the vacuum. If you have an auto trans, follow the vacuum line from the trans to the engine. If you have power brakes, there should be an extra port on the brake booster and the other end of that would also go to the same spot on the intake as the Auto trans line. If you have neither, there should still be a port somewhere on the intake, but it may just have a plug in it. If you only have one (auto trans or power brakes) then the port on the intake manifold may not have an "extra" port so you may have to buy a brass splitter.
If you mean where to mount it... wherever you'd like
Do you mean where to install the vacuum pickup end or where to mount the gauge (to the dash or firewall)?
There should be a port somewhere on the intake manifold for connection of the vacuum. If you have an auto trans, follow the vacuum line from the trans to the engine. If you have power brakes, there should be an extra port on the brake booster and the other end of that would also go to the same spot on the intake as the Auto trans line. If you have neither, there should still be a port somewhere on the intake, but it may just have a plug in it. If you only have one (auto trans or power brakes) then the port on the intake manifold may not have an "extra" port so you may have to buy a brass splitter.
If you mean where to mount it... wherever you'd like
1964 Comet Caliente Convertible
30,000 miles on our rebuild
All Comets start out as dreams...
Re: Vacuum gauge hook up for the 200
Yeah, my problem has been no extra port and I'm not sure where to put the T fitting at.
Re: Vacuum gauge hook up for the 200
I remembered this question the other day at a buddy's shop ,and he has a 6cyl at 2drht 64comet sitting in the weeds,so I took a look-see and the only place I can come with is to tee off the intake manifold where the vacumn screws into it ,for the MODULATOR valve going back to the tranny. pop
pop/glenda
Re: Vacuum gauge hook up for the 200
Cool thanks Pop!
- 1964Comet404
- Posts: 51
- Joined: Mon Jul 08, 2013 9:56 pm
- Location: upstate, ny - owego (not to be confused with "oswego")
- Contact:
Re: Vacuum gauge hook up for the 200
I've got a gauge under the hood mounted center top of the firewall, tapping into the vacuum line that goes to the brake booster, which I believe is a 3/8" hose. That way I can see it at any time when I'm working on the engine. It's too small, and the lens is plastic, so I've got a new, larger, vintage guage, with a glass lens to mount in it's place so I'll take some pics when I'm done. I've got another guage that I'll be mounting inside the cockpit and I'll probably Tap off the same hose. I believe you can tap into any hose that comes off of manifold vacuum. vacuum should be consistent throughout the vac-system. On my L6 there's not many choices.
john v. b.
"If it aint' broke... Drive It!" ~ me
"You cannot do a kindness too soon, for you never know how soon it will be too late." - Ralph Waldo Emerson
"If it aint' broke... Drive It!" ~ me
"You cannot do a kindness too soon, for you never know how soon it will be too late." - Ralph Waldo Emerson
- 1964Comet404
- Posts: 51
- Joined: Mon Jul 08, 2013 9:56 pm
- Location: upstate, ny - owego (not to be confused with "oswego")
- Contact:
Re: Vacuum gauge hook up for the 200
Hi Matt! You can find them on Ebay. I found mine there, new/old in the box complete, and I think I paid less than 20 bucks for it. Be patient and get a great deal. When I mount it I'll post some pics.MattDoscher wrote:That mile-o-meter gauge sounds neat. I haven't seen one at any car show I've been to. I drove a uhaul truck that had one installed but it was hard to keep it in the green!
Show us some pic's when you get it installed.
Matt
ps. for some reason i'm not getting notifications from this board. i don't know why (?!).
john v. b.
"If it aint' broke... Drive It!" ~ me
"You cannot do a kindness too soon, for you never know how soon it will be too late." - Ralph Waldo Emerson
"If it aint' broke... Drive It!" ~ me
"You cannot do a kindness too soon, for you never know how soon it will be too late." - Ralph Waldo Emerson
- 1964Comet404
- Posts: 51
- Joined: Mon Jul 08, 2013 9:56 pm
- Location: upstate, ny - owego (not to be confused with "oswego")
- Contact:
Re: Vacuum gauge hook up for the 200
Right now i've replaced my carburetor and I'm learning the fine art of carb tuning and will be installing that mile-o-meter shortly... I'll post some pics when I'm done of it and the one I mount under the hood... that one's pretty cool too!MattDoscher wrote:John B.,
Any luck installing that economy gauge?
Matt
i still ain't getting notifications...
john v. b.
"If it aint' broke... Drive It!" ~ me
"You cannot do a kindness too soon, for you never know how soon it will be too late." - Ralph Waldo Emerson
"If it aint' broke... Drive It!" ~ me
"You cannot do a kindness too soon, for you never know how soon it will be too late." - Ralph Waldo Emerson