trunk panel repairs

Discussions about general body work and modifications

trunk panel repairs

Postby cairnscomet » Wed May 10, 2017 12:15 am

Hi all

started a few rust repairs on the 64 vert and came across this area on join of rear quarter and trunk upper panel.
No rust here just filled with bog
Now my question is best way to repair - fill with gorilla glass or weld patch

http://i1156.photobucket.com/albums/p57 ... hjdmbz.jpg

Grant
1964 Comet Caliente Convertible 302 4sp
1966 Ford Ranchero 390FE - daily driver
1923 408W T-Bucket
cairnscomet
 
Posts: 21
Joined: Tue Jan 19, 2016 8:02 pm
Location: Cairns QLD Australia

Re: trunk panel repairs

Postby Loner » Wed May 10, 2017 11:18 am

Hard to tell where your talking about on the trunk from your picture. I'm assuming it is the area above the trunk lid on the right or left at the leaded seam. To fix this you need to take the lead out and remove all the rust if there is any. Then relead it or use a good metal to metal body filler like this stuff.

http://www.tcpglobal.com/USC-14060_4.ht ... RNKnBllDqA
Image
Loner
 
Posts: 367
Joined: Wed Mar 11, 2015 8:58 am
Location: Mariposa,CA

Re: trunk panel repairs

Postby cairnscomet » Wed May 10, 2017 3:26 pm

thats the spot ,rear trunk panel/rear glass

good idea about the aluminium epoxy that will be perfect

added a photo that should explain better the area I am talking about

http://i1156.photobucket.com/albums/p57 ... dts2h8.jpg

Grant
1964 Comet Caliente Convertible 302 4sp
1966 Ford Ranchero 390FE - daily driver
1923 408W T-Bucket
cairnscomet
 
Posts: 21
Joined: Tue Jan 19, 2016 8:02 pm
Location: Cairns QLD Australia


Return to Body Shop

Who is online

Users browsing this forum: No registered users and 1 guest