62 Cometman

Let everyone know a little about yourself
Post Reply
62Cometman
Posts: 80
Joined: Tue Oct 03, 2017 4:47 pm

62 Cometman

Post by 62Cometman »

Hey guys, ive been watching and reading and learning for a while and finally decided to join. I have a 1962 Comet, Corinthian white, with an aqua interior that i reupholstered, it has a 170 six that i rebuilt this last winter, more of a freshining up, ball honed the clyinders new bearings and rings, NOS metal shim head gasket, relapped and ground valves, shimmed springs, head machined .060 inch and all new gaskets, speed daddy dual outlet header, full 2 inch exhaust with thrush glasspacks that dumps right in front of the passenger rear wheel. 2.77 tranny rebuilt still using same old syncros cause no one cars to make a new set, rebuilt drive shaft and 7.25 rear with 3.50 ratio, american racing outlaw II wheels with BF Goodrigh Radial T/A rubber, scarebird 4 lugs disc brake set up on the front. Custom made adjustable monte carlo bar, currently in the process of making boxed upper and lower control arms and some "nicer" tie rod adjuster sleeves using some swedge tubes and lock nuts, after a complete front suspension rehaul i plan on going over to the rear and doing the same then installing both front and rear sway bars 1 1/8 inch front and 7/8 rear then future plans are a turbo 200 with a T-5 and 8 inch rear. :twisted:
62 Comet 170, dagneham trans, 2.8 7.25 rear 260 T5 8 inch swap planned for the future.

Image

User avatar
poboyjo65
Moderator
Posts: 7058
Joined: Thu Oct 20, 2011 9:40 pm
Location: Camden, Tenn.

Re: 62 Cometman

Post by poboyjo65 »

Welcome on! :D love to see it! :P
Image
Johno

User avatar
loman
Posts: 1301
Joined: Sat Dec 28, 2013 9:03 am
Location: Missouri

Re: 62 Cometman

Post by loman »

I'm glad you decided to join. Welcome aboard. I don't know if it is just me, but it seems like there has been more and more 62 and 63's starting to show up. That's great! If you get the chance load some pictures, I'm sure everyone would like to see your ride.
Image

User avatar
Jims65cyclone
Posts: 2764
Joined: Sun Nov 23, 2014 10:29 pm
Location: Lexington, SC

Re: 62 Cometman

Post by Jims65cyclone »

Welcome aboard! Sounds like a neat ride. Let's see some pics.
Jim
Image

popscomet
Posts: 9689
Joined: Sat Jan 01, 2011 11:19 pm
Location: Jacksonville, Arkansas

Re: 62 Cometman

Post by popscomet »

ALL sounds mighty spiffy to ol pop,,,welcome and good luck pop
Image
pop/glenda

62Cometman
Posts: 80
Joined: Tue Oct 03, 2017 4:47 pm

Re: 62 Cometman

Post by 62Cometman »

Image

Image

Image

Image
62 Comet 170, dagneham trans, 2.8 7.25 rear 260 T5 8 inch swap planned for the future.

Image

popscomet
Posts: 9689
Joined: Sat Jan 01, 2011 11:19 pm
Location: Jacksonville, Arkansas

Re: 62 Cometman

Post by popscomet »

nice looking comet,,,pop
Image
pop/glenda

Santa's Comet
Posts: 250
Joined: Wed Jul 31, 2013 2:48 pm

Re: 62 Cometman

Post by Santa's Comet »

Very Nice Ride!!! I'll bet it turns heads!
NP Dave
Image

62Cometman
Posts: 80
Joined: Tue Oct 03, 2017 4:47 pm

Re: 62 Cometman

Post by 62Cometman »

Thanks! I know i got a long way to go still in some areas but id like to think its a decent driver
62 Comet 170, dagneham trans, 2.8 7.25 rear 260 T5 8 inch swap planned for the future.

Image

User avatar
poboyjo65
Moderator
Posts: 7058
Joined: Thu Oct 20, 2011 9:40 pm
Location: Camden, Tenn.

Re: 62 Cometman

Post by poboyjo65 »

Looks great! :D only thing, it puzzles me how it has the same shaped paint chipped on both sides of lower fenders. :? But I'd say it is a few notches above a decent driver. :D
Image
Johno

62Cometman
Posts: 80
Joined: Tue Oct 03, 2017 4:47 pm

Re: 62 Cometman

Post by 62Cometman »

Those arent paint chips theyre rust holes :oops: luckily i have another set of fenders waiting to be reworked an mounted, which is a shame because the fenders on the car are neigh on perfect other than those rust holes
62 Comet 170, dagneham trans, 2.8 7.25 rear 260 T5 8 inch swap planned for the future.

Image

Post Reply