Saw this at a local speed shop
Saw this at a local speed shop
This would be cool to see under the hood.
Re: Saw this at a local speed shop
That would look cool under the hood! Wonder what it would be like to tune.
Matt
Matt
-
- Posts: 1870
- Joined: Wed Jun 06, 2012 6:47 am
- Location: Lake Placid, Florida
Re: Saw this at a local speed shop
I've tuned dual's with the snail vacuum gauge. 6 would take a lot of patience.
66 Cyclone GT; 245/60R15's on 15x8's and 215/70R15's on 15x7 Magnum's.
There's nothing like the sound of a pushrod V8 singing at the top of her lung's.
There's nothing like the sound of a pushrod V8 singing at the top of her lung's.
Re: Saw this at a local speed shop
I think it's set up to use a FAST FUEL injection computer, so it's probably way easier than a single 4 to set up. Granted it probably costs 5 times as much.
Re: Saw this at a local speed shop
YRS AGO,and this is the honest truth,,,,there was an ol man that regularly brought a split window 'vette to the drag strip,was beautiful...and it was powered by a ford 289 with the weber set up....I ask him why he wasted a good ford engine..he laughed and said well,I love the looks of this 'vette,and I feel the same way about that little SBF,so I just married the two together,and to me I have the best of both worlds,,after seeing this picture,brought that ol man and his car to memory.............
pop/glenda
Re: Saw this at a local speed shop
That's craziness pop!!! but I see his point, he liked them both, so why not. Probably pissed off a lot of people!!
Re: Saw this at a local speed shop
IT SHOCKED ME, he made a pass without the hood and when he drove thru the pits,I said to my then teenage son,unless my eyes just pulled a trick on me ,that damn thing has a FORD motor !! sure e'nuff it did ! was up there a couple of Saturdays ago to watch the sat night street car races and that vette was still runnin but the old man has passed away and the new owner had replaced the 289 with a BBC,,,I didn't even watch it make a pass,it don't interest me anymore......BUT IT WAS SHARP LOOKING IN IT'S DAY,with that SBF....THANKS !rjones35 wrote:That's craziness pop!!! but I see his point, he liked them both, so why not. Probably pissed off a lot of people!!
pop/glenda
Re: Saw this at a local speed shop
Only use the brakes to stop and get gas.
Projects
65 Comet 421Stroker
93 Mark VIII Supercharged w/Fogger
70 Torino GT
Projects
65 Comet 421Stroker
93 Mark VIII Supercharged w/Fogger
70 Torino GT
Re: Saw this at a local speed shop
Very cool!
-
- Posts: 272
- Joined: Tue Mar 31, 2015 2:36 pm
Re: Saw this at a local speed shop
very cool set of stacks...and now on to the engine going in.hard to tell on my wee screen of my phone but is that a belt drive timing set up?
what are the fittings coming out of the front ? and are the flat plates going to be rigid engine brackets or just a temporary thing? Nice work and great looking valve covers
what are the fittings coming out of the front ? and are the flat plates going to be rigid engine brackets or just a temporary thing? Nice work and great looking valve covers
Re: Saw this at a local speed shop
The fittings on the valve cover will go to the vacuum pump. the two fittings on the block plate go to the electric radiator mounted water pump. Motor will have motor plate front and rear rear mounts to firewall
Only use the brakes to stop and get gas.
Projects
65 Comet 421Stroker
93 Mark VIII Supercharged w/Fogger
70 Torino GT
Projects
65 Comet 421Stroker
93 Mark VIII Supercharged w/Fogger
70 Torino GT