Hi,
I'm going back to a mechanical fuel pump on my '67 Caliente which has a 351 Windsor and an Edelbrock carb (fuel inlet on passenger side). I would like to avoid rubber fuel line if I can but I'm having trouble finding a pre-made steel line or braided hose which will work for me. I would prefer not to bend a custom line.
I'd appreciate any suggestions. Thanks, Ed
Pump to Edelbrock Carb Fuel Delivery Question
-
- Posts: 606
- Joined: Mon Aug 27, 2007 2:54 pm
- Location: maryland
Re: Pump to Edelbrock Carb Fuel Delivery Question
only option make a template send to classic tube and have one made.
Re: Pump to Edelbrock Carb Fuel Delivery Question
Most ,if not all edelbrock carbs have an inlet on the driver side also. just thought I'd mention it in case you find one that is a little short. & they make a chrome hard line with a banjo fitting, long enough to get out in front of the carb away from the throttle linkages, where you could then add a braided hose or what ever.
Re: Pump to Edelbrock Carb Fuel Delivery Question
Thanks Barry and Jo