COMET CENTRAL

Thanks for the information.

Working on restoring my 66 390 Cyclone GT valve cover emblems. Does anyone have a picture or know the color highlights that these came with from the dealer.

Lost my pictures can anyone confirm the mounting location of the starter cable bracket grommet. Looks like behind sway bar bushing or motor mount.

Thank you for the information.

Does anyone know if this is the correct air cleaner for a 1966 Cyclone GT 390

To clarify I am not looking to buy. When I purchased my car there were a bunch of different springs in a box. Trying to figure out if any of them are the correct ones. Anyone that has a original car the measurements of the springs would be appreciated.

Can anyone provide the length of the correct spring for the 66 GT fiberglass hood.

Do anyone know what the factory finish color was on the instrument cluster.

Any information on a convertible does the stock set up run between the floor and the under carriage reinforcing plate (see picture) or outside of the plate

Does anyone know if the original fan shroud on a 66 Cyclone GT was plastic or metal

If any one has an original parts car the fan part number is stamped on the fan blade and the clutch part number is stamped on the flange that bolts to the water pump.

Have a 66 GT 390/with air conditioning. Can anyone provide the correct part numbers for the clutch and fan.

Does anyone have the wiring diagram for the instrument dash panel for a 66 cyclone

Due to a fire I am trying to confirm locations of these vacuum line connection points on my 66 cyclone 390 - Heater control valve - Not sure what it is but there is tubing that come off the exhaust manifold (not the choke tube) then converts to vacuum tubing Any information or pictures would be appr...

Does the fire wall ground cable use the same location on the block as the transmission dip stick mount for a 66 390