COMET CENTRAL

Sent you some hope they help

There was a guy re popping them years ago so I bought a set I never used. I would sell, text me and I'll sen photos. Steve 734-three0eight-2sixsix8

I use 15x8 on mine with a zero offset, 28 inch et streets. 30 inch tires are too tall without modification to the quarter. If your going to run steels and make a lot of power buy good ones, I keep bending wheel studs because wheel vintiques I think are too thin and give at the acorn lug nuts. https:...

I moved my master cylinder over an inch to clear the valve covers

I like that you don't waist any time thinking you just jump in and do it!

Thanks guys! Congratulations, Steve! You have an awesome car. I went back and looked all the way through your build thread this evening, and it's an amazing project. Jim It's too bad Photobucket screwed everything up I had some good photos in there! Congratulations Steve,that's a nice reward for you...

Just a Followup on my project. Won 1st place at Detroit Autorama for Street Machine Custom. Figured I'd share with you guys, I got some nice parts and good info here that really helped me out. Even just looking at photos and reading old posts helped. Thanks Forum! https://s20.postimg.org/ynkiv5hx9/I...

Leny, I’ve got about 8 of them. Email me rcode65 at yahoo.com. Steve M

Thanks for all the good comments! Drove it around yesterday for the first time, got the front aligned and weighed it 3420 lbs with 1/3 tank of gas. It's a beast! Maybe this winter I'll go through the post and put photos back for reference.

Thanks to Photobucket for messing up all the photos! I wanted to post some photos of my finished car. Thanks for the help and parts I got here! https://s20.postimg.org/x7ifxk09p/IMG_0198.jpg https://s20.postimg.org/re8dwzom5/IMG_0199.jpg https://s20.postimg.org/m1jjiv0pp/IMG_0202.jpg https://s20.pos...

Still need 1 ornament

Still looking for 1 nice un-pitted upper emblem, ornament that goes in the sheet metal upper door like in the photo, photo is not mine. I found 1 NOS on ebay.
contact Steve rcode65@yahoo.com

for 65 the 3rd and 4th numbers in the Vin would be 27 for a Cyclone

Here you go Pops, it was a bit of work. I had to cut out the back with a hole saw in a drill press backed with a 2x4, then trim with a pair of shears. Worked pretty good. http://i1143.photobucket.com/albums/n631/66sevets/64%20Comet/20160224_185645_zpsyvok8838.jpg http://i1143.photobucket.com/albums/...

Any reason why you swapped temp and pressure (isn't temp supposed to be on the right and pressure on the left)? I just put them how I wanted to look at them. Put fuel and oil temp on the left because I figured I'd be tending to look right towards the tach and I'll see oil pres and water temp. I got...