COMET CENTRAL

You wouldn’t happen to have a 63 comet convertible top frame laying around would you?

If anything, I would do a valve job rebuild with cam and lifters and leave the bottom end alone......that way u don't even have to pull the motor

ISO a 63 comet convertible top frame or part of one for passenger side top frame above the back window

Anybody parting out a 63 comet convertible?.....I need some convertible top frame parts

I'm in the middle of a 6 to 302 swap in my 63 comet convertible, anybody having a problem with the tie rod hitting the oil pan or in the way of the shorty header on the driver side?

i figured it out.....the passenger inner fenderwell is different from the 6 cylinder and the v8.....DUH, i just had to open the hood on my s22 and saw it

Does anyone have a picture of they're 63 comet alternator setup on they're engine Im swapping from 6 to a 302 and alternator is hitting the battery tray I can't figure it out...could use some help....thanks

I want to post a few pics of my comets but don't know how on here

Mine is a 5 lug rear

Question: I just picked up a 8" rear from a 76 maverick ...its the perfect width for my 63 comet, but when I got it home and was doing some measuring I noticed a couple things.....one axle is an inch longer than the other side, and 2. The center housing is offset....is this gonna work in my comet or...

Im hoping its an easy fix

I figured out there is big rubber weatherstrippng that goes around the convertible top frame .....ordered it from ebay.....another problem arose....the convertible top frame is bent. Most likely from somebody jumping on it to get it down

I might have a set.....i bought a comet and the guy gave me a whole pickup of extra parts....( a $&@#) let me
Check some of the boxes out in the
Garage

Hey.....i bought the tailights from you... Do u still have the convertible top frame......mine is bent and broken welds...(bought like that)...looks like somebody jumped on it to get it down I could use either the parts from the door to where it curves or the whole thing.......dont need the top...pl...

Figured out the frame is bent right where it folds, and the welds broke..
So now i gotta figure out how to straighten the frame and repair the welds