COMET CENTRAL

Love the dash Lou. looks like a lot of tedious work.

Thanks

What do you guys do for an upgraded radio. The only thing I've found so far is to send the original in and have it redone

I was wondering about that. Thanks for uplifting my confidence

Here is a picture of my 89 - 302 with a serpentine belt set up I put together. The brackets are off an 87 Marque . It had the double pulley on the bottom, so I got a single off ebay and I had to also get a smaller water pump pulley off ebay. I made the idler arm pulley set up and installed a AC dele...

Tell him I'm praying for his safety. May god bless him. You both have great looking cars. Fun to look at your pictures and see your progress.

After looking up 4 link designs I decided to build my own. I built a triangular 4 link using material I bought on the internet. You can see my build under Tomb's 65 comet build. It's listed just under your post.

Haven't had much time to spend on this project, but I removed the engine and transmission from it. Both are good working units, a 260 and a C4 and they are up for sale. Here is a picture of the 260 https://s26.postimg.cc/ipp9e7lyh/DSC01384.jpg This is the 89 - 302 roller block almost ready to instal...

Hood looks great. I like personal touches

If I where to do it again I would not go with the 45 degree angle with the tabs on top of the rear end. My upper links are really long and I have plenty to work with, I figured I would locate my rear and then determine the tab locations to weld them on, I would like to avoid welding to the pumpkin ...

I really like seeing these because I am going to do a triangulated 4-link as well so this gives me a preview. See Ya, Mike If I where to do it again I would not go with the 45 degree angle with the tabs on top of the rear end. I would go with less angle so that the upper links would run into the fr...

I learned how to put my rear in pretty quick. I would have the tires on it & roll it under there. of course it was a little different - leaf springs bolted to the axle. I would push from the back eyes & get it lined up then push down,making the front eye go up starting in to the pocket. usually had...

I had a pair of 2 chamber and I could only drive for 30 minutes so I swapped them out for some 3 chamber. They still sound good outside but you don't get that droning noise inside. Today I installed the rear end for the final time. I thought I had it figured out how to do it easily, but it turned ou...

Thanks for the compliments. I'm spraying the bottom with bed liner and I wanted to spray the trunk area with a sound deadener. I want to use the car as a daily driver and be able to talk to my wife. It has flow master mufflers and sounds good on the outside.

Well I cut the rear end out and then welded the tabs on good. Painted it up and put it back together with all new bearings and seals. https://s26.postimg.cc/h5jxftdk9/DSC01366.jpg Today I put the trunk back together and sealed up the seams. https://s26.postimg.cc/oa1qouktl/DSC01365.jpg What do you g...