Hello all, still chugging along on my 64 Comet Pro Street build and I was wondering if any one out there had put a new set of aftermarket brake/clutch pedals in their 64 Comet ? I have Willwood disc brakes front and back..
Looking for ideas or thoughts from y'all. Thanks !
Red
Any Ideas for a new aftermarket clutch/brake assembly ?
Any Ideas for a new aftermarket clutch/brake assembly ?
1964 Comet Caliente/1964 Galaxie 500
Re: Any Ideas for a new aftermarket clutch/brake assembly ?
I am no help, the only part of my brake and clutch re-do that was not replaced was the pedals even though I did redo the bushings.
Someday if the mood strikes me and I want to lay on my head I might do the roller bearing upgrade on them but for now and maybe the rest of my life they are good
See Ya,
Mike
Someday if the mood strikes me and I want to lay on my head I might do the roller bearing upgrade on them but for now and maybe the rest of my life they are good
See Ya,
Mike
Re: Any Ideas for a new aftermarket clutch/brake assembly ?
IN 1995 when POP's comet was redone,replaced the bushings and used a some anti=seiz and all is still good today!!
pop/glenda
Re: Any Ideas for a new aftermarket clutch/brake assembly ?
Not sure of his user name, projim64 maybe put Howe (Ithink?) pedals in a prostreet 64. Think he said he bell cranked the master cyl 90° to hide it and keep the fire wall clean.
I have some pics somewhere of an early Falcon that was done as a street legal circle tracker in Pearson colours. It has aftermarket pedals and a hole in the dash to access the reservoirs for brake and clutch.
https://app.photobucket.com/u/fredsmail ... 0adf40c92f
I have some pics somewhere of an early Falcon that was done as a street legal circle tracker in Pearson colours. It has aftermarket pedals and a hole in the dash to access the reservoirs for brake and clutch.
https://app.photobucket.com/u/fredsmail ... 0adf40c92f
Re: Any Ideas for a new aftermarket clutch/brake assembly ?
I tracked down projim64, he used Tilton pedals but there were no install pics.
I googled tilton pedal install and there are some ideas there.
Good luck great build!
Fred
I googled tilton pedal install and there are some ideas there.
Good luck great build!
Fred