Quarter window rollers and rivets

Discussions about general body work and modifications
Post Reply
Tommy-T
Posts: 16
Joined: Fri Jun 05, 2020 1:45 pm

Quarter window rollers and rivets

Post by Tommy-T »

Does anybody know where you can buy the quarter window rollers and rivets for a '65 Cyclone.

I am in process of re chroming the pot metal portion of the window frame and had to remove the plastic rollers along with their rivets to prepare them.

Are new parts available? The lower middle roller and rivet seem to be a different size. Is that so?

lavron
Site Admin
Posts: 4710
Joined: Sat Nov 01, 2003 9:17 am
Location: Missouri, Ozarks
Contact:

Re: Quarter window rollers and rivets

Post by lavron »

I have been stealing window rollers out of my parts car but not sure that is what you are looking for the ones I have been replacing are not in the track (they roll in th track and are clipped on with a ‘c’ clipor riveted on but sit on the regulator pin/axleI would have to see what you are looking for.. Many Ford cars and trucks from that era use the same roller, I would think there would be an aftermarket source The rollers are orange BTW that I am talking and clip to the regulator and roll in the window channel I have greasing mine with white lithium grease when I install them.but I still need to gEt my side windows rebuilt and reinstalled would like to have that done before the back glass goes back in to help prevent possibly blowing the back glass out.plus be nice to have an enclosed car again :lol:
Mike's build thread
viewtopic.php?f=9&t=13058
Image

User avatar
Jims65cyclone
Posts: 2754
Joined: Sun Nov 23, 2014 10:29 pm
Location: Lexington, SC

Re: Quarter window rollers and rivets

Post by Jims65cyclone »

Do you see what you're looking for here?
https://johnsmustang.com/collections/da ... %20Windows

Jim
Image

User avatar
Joe Travers
Posts: 2424
Joined: Mon Sep 21, 2020 6:23 pm
Location: Louisiana

Re: Quarter window rollers and rivets

Post by Joe Travers »

Image

1963 1/2 Custom Hardtop
342 stroker, solid roller, T-10, 3.55 posi

Kingspeedy2
Posts: 272
Joined: Tue Mar 31, 2015 2:36 pm

Re: Quarter window rollers and rivets

Post by Kingspeedy2 »

The ones you are talking are these .Find a machinist to make you some . I will be in the same boat and will make some eventually.
If the link doesnt work just search ebay for comet window rollers.There was rivets by themselves aswell

https://www.ebay.com/itm/132218247079?f ... BMmtSil6Vf
or
https://www.ebay.com/itm/192624474653?f ... R5rUopelXw

Post Reply