New project 1/2 Comet 1/2 Falcon
Re: New project 1/2 Comet 1/2 Falcon
I cut the headlight bracket off my junk 63 fender then fit it to the 62 fender.
Installed everything and trimmed the headlight buckets to fit the Falcon radiator support.
I need to make some 90 degree brackets to attach the inner side of the headlight brackets to the rad support.....
I need to trim the gravel shield that mounts behind the bumper because it does not fit the Falcon rad. support....
I am thinking about hanging the doors so I can see the lines of the fenders down to the quarters.....
Installed everything and trimmed the headlight buckets to fit the Falcon radiator support.
I need to make some 90 degree brackets to attach the inner side of the headlight brackets to the rad support.....
I need to trim the gravel shield that mounts behind the bumper because it does not fit the Falcon rad. support....
I am thinking about hanging the doors so I can see the lines of the fenders down to the quarters.....
-
- Posts: 5933
- Joined: Mon Feb 20, 2006 12:57 am
- Location: Camarillo,California
Re: New project 1/2 Comet 1/2 Falcon
Align the doors to the quarters first as the quarters do not move,then adjust the fenders to align with the doors!! An old bodyman taught me that step!! ROY.
Real Racecars have 3 pedals
Re: New project 1/2 Comet 1/2 Falcon
Thanks for the tip...
-
- Posts: 50
- Joined: Mon Mar 05, 2012 4:54 pm
- Location: toledo ohio
Re: New project 1/2 Comet 1/2 Falcon
I have pics of frt of 62 comet. contact me and i will send them. or tell me how to post them here. mike
If I wanted it perfect, I would'nt have hired me.