Headers

The Round Body, Finned Comets
Post Reply
63Custom4Door
Posts: 5
Joined: Wed Feb 12, 2020 11:33 pm

Headers

Post by 63Custom4Door »

Does anyone know if shorty headers from a Fox body Mustang will work in the 63? I found a set of equal length shorties for pretty cheap. I ran these in my 86 years ago and they were a little tight in there compared to regular non equal length shorties.

351 Pinto
Posts: 86
Joined: Wed Oct 14, 2015 7:40 am

Re: Headers

Post by 351 Pinto »

I tried a set once and they did not work. I think mine were BBK shorties. I don't even remember where they hit, but it was definitely a no-go. My car is a 63, 331, T5, manual steering, and still uses the stock clutch rod setup.

If you already have them, just try it. Everybody and his brother made Fox body Mustang parts, so your may be very different from the set I had.

351 Pinto
Posts: 86
Joined: Wed Oct 14, 2015 7:40 am

Re: Headers

Post by 351 Pinto »

Sorry, I see that you don't have them yet. Missed that on the first go.

Post Reply