My Canadian manufactured Comet convertible has a 170 engine, but has power steering. The tie rods for a 6 cylinder only appear to be for manual steering. I do have a set of these, but they will not work. Anyone run into this situation before? Everything I look at on line leads me to think I need the V8 tie rods. Any help would be appreciated.
Darrell
63 Tie Rod Ends
Re: 63 Tie Rod Ends
So a shop here at home was able to match up my old tie rods with new ones. He and I figure the ones I needed are used with a V8 with power steering. Life is good an I can get the front end work finished!
- Boss/Cyclone
- Site Admin
- Posts: 2740
- Joined: Thu Oct 19, 2006 9:55 pm
- Location: South Central Michigan (Near Michigan International Speedway)
Re: 63 Tie Rod Ends
That is good news. Sorry we did not have the answer, but your post may help someone in the future.
1965 Mercury Cyclone former drag car, 1971 Boss 351 engine, 4 speed, ladder bars, etc. Now returned to a street car.
Larry
Larry