Q: Door card removal ?

The Round Body, Finned Comets
Post Reply
nzcomet
Posts: 2
Joined: Fri Nov 17, 2023 8:10 pm

Q: Door card removal ?

Post by nzcomet »

Hi from New Zealand.
On our ‘62 Comet custom station wagon
Do the stainless upper and lower mouldings come off when you’re removing the inner door cards ?
Also who would be my best option for buying weather strips and door rubber seals
Thanks

User avatar
Jims65cyclone
Posts: 2870
Joined: Sun Nov 23, 2014 10:29 pm
Location: Lexington, SC

Re: Q: Door card removal ?

Post by Jims65cyclone »

First, welcome aboard! :D You can get answers to most of your questions right here, free for the asking. We'd love to see your car, and what you're doing to it. You should start a build thread so we can follow along. Here's how to post pictures:
http://www.cometcentral.com/forum/viewt ... =1&t=16011

I'm afraid I don't know the answer to your first question, but here are some leads on weather stripping:

https://www.falconcometinteriors.com/
(click on the pricing link and look on page 7)

https://www.falconparts.com/ford-falcon ... 7p7335.htm

https://www.autokrafters.com/mercury-co ... atherstrip

https://www.parts123.com/parts123/yb.dl ... dffeja~~20

I'm sure there are others that will probably share with you, but that should keep you busy for a while. :D

Coincidentally, our across-the-street, two-doors-up neighbor is from NZ.

Jim
Image

nzcomet
Posts: 2
Joined: Fri Nov 17, 2023 8:10 pm

Re: Q: Door card removal ?

Post by nzcomet »

Thanks Jim 👋
Still trying to drive this site
But will keep in touch 👍
Pete.

User avatar
bmmaurer
Posts: 507
Joined: Tue Sep 08, 2009 5:16 pm
Location: Mount Dora, Florida

Re: Q: Door card removal ?

Post by bmmaurer »

Upper and lower stainless retainers come off, if needed, after the door cards are removed. To remove the cards, remove the window cranks, door handle and arm rests. Then with a broom handle or other round piece of wood or pipe inserted centerline behind the card horizontally to bend the card outward which will remove it from the upper and lower stainless holders.

Post Reply