Bracket on front of heater plenum... (purpose?)
Bracket on front of heater plenum... (purpose?)
Hey folks -
Does anyone know for what purpose this metal bracket was mounted on the front of heater plenum (see picture and then red arrow to its location on illustration)?
I removed this from my original (cardboard) plenum (65 Caliente convertible). However on the the plastic reproduction part (e.g. here) it is neither included nor are there obvious holes to use for re-mounting.
I can easily add holes to mount to the new plenum… but I'd like to know what exactly the thing is supposed to be doing... I don't see how it could be involved mechanically... there are no hoses down there... I don't think there are any electrical wires that pass down there... the best I can come up with is that this may have been some kind of fitting for the front end of a center console (which my car did not have out of the factory)?
Does anyone know for what purpose this metal bracket was mounted on the front of heater plenum (see picture and then red arrow to its location on illustration)?
I removed this from my original (cardboard) plenum (65 Caliente convertible). However on the the plastic reproduction part (e.g. here) it is neither included nor are there obvious holes to use for re-mounting.
I can easily add holes to mount to the new plenum… but I'd like to know what exactly the thing is supposed to be doing... I don't see how it could be involved mechanically... there are no hoses down there... I don't think there are any electrical wires that pass down there... the best I can come up with is that this may have been some kind of fitting for the front end of a center console (which my car did not have out of the factory)?
Thanks,
kevin
1965 Caliente Convertible
5H25A525287 (76DM6204L5416)
kevin
1965 Caliente Convertible
5H25A525287 (76DM6204L5416)
Re: Bracket on front of heater plenum... (purpose?)
I'm thinking maybe back mount underdash air?
But really no idea
But really no idea
Re: Bracket on front of heater plenum... (purpose?)
Do you mean in the case there was also factory air conditioning installed?
A theory advanced by Mike Roe (in email) is that this is a stop for the cable swing. Its positioning is consistent with Mikes theory... however it sure seems like *dramatic* overkill for that problem...
A theory advanced by Mike Roe (in email) is that this is a stop for the cable swing. Its positioning is consistent with Mikes theory... however it sure seems like *dramatic* overkill for that problem...
Thanks,
kevin
1965 Caliente Convertible
5H25A525287 (76DM6204L5416)
kevin
1965 Caliente Convertible
5H25A525287 (76DM6204L5416)
Re: Bracket on front of heater plenum... (purpose?)
Ya factory installed air, maybe. Ive been around these for over 40 years, never seen that bracket.
I have a factory underdash in the garage Ill see if it has a stud in the back of the housing.
Fred
I have a factory underdash in the garage Ill see if it has a stud in the back of the housing.
Fred
Re: Bracket on front of heater plenum... (purpose?)
They have a stud Fred, but it goes down to the floor for support.
the bracket may be for ac hoses. some 6cyl cars had the hoses exiting thru the pass side firewall,so may have been for those.
Re: Bracket on front of heater plenum... (purpose?)
Do you have a guess on the rough diameter of that hose?
To me this LOOKS like a fat hose bracket. As in maybe 1.5" diameter hose... if the hose you are thinking of is around that then seems like a really good theory...
(Now why the folks in Lorraine decided to put that in my convertible w/out AC is a mystery...)
Thanks,
kevin
1965 Caliente Convertible
5H25A525287 (76DM6204L5416)
kevin
1965 Caliente Convertible
5H25A525287 (76DM6204L5416)
Re: Bracket on front of heater plenum... (purpose?)
So Kevin, every time I see a post of yours I see a scene reflected
in those glasses and every time I try to figure it out,, but alas no luck! So Kev wth is the scene!!!
Fred
in those glasses and every time I try to figure it out,, but alas no luck! So Kev wth is the scene!!!
Fred
- Jims65cyclone
- Posts: 2764
- Joined: Sun Nov 23, 2014 10:29 pm
- Location: Lexington, SC
Re: Bracket on front of heater plenum... (purpose?)
Looks like the cockpit of a sailboat to me. Or maybe not.
Jim
Jim
Re: Bracket on front of heater plenum... (purpose?)
Ha! It's kind of random... what is reflected there is my daughter who is looking back over her shoulder at a close friend who is taking the picture... so it's kind of like a group shot of the three of us together. It was taken on his boat on a spectacular sunny day in late July. We were out to see the Blue Angels perform over Lake Washington for Seattle's Seafair weekend. That picture reminds me of a very good time, makes me smile.
Click the below image if you want to see a larger version of it...
(Jim you were close enough!)
Thanks,
kevin
1965 Caliente Convertible
5H25A525287 (76DM6204L5416)
kevin
1965 Caliente Convertible
5H25A525287 (76DM6204L5416)
Re: Bracket on front of heater plenum... (purpose?)
Thankyou!
Now I will smile too every time you post!
Fred
Now I will smile too every time you post!
Fred
- Jims65cyclone
- Posts: 2764
- Joined: Sun Nov 23, 2014 10:29 pm
- Location: Lexington, SC
Re: Bracket on front of heater plenum... (purpose?)
What is that bar thing above the stern of the boat? I took it to be a mast boom on a sailboat.
Jim
Jim
Re: Bracket on front of heater plenum... (purpose?)
My guess its the speaker mount and the occasional skier
Fred
Fred
Re: Bracket on front of heater plenum... (purpose?)
Wakeboard tower! ... and yes... big ol' speakers... we've spent many days boarding and surfing behind that boat... tons of fun.
Thanks,
kevin
1965 Caliente Convertible
5H25A525287 (76DM6204L5416)
kevin
1965 Caliente Convertible
5H25A525287 (76DM6204L5416)