Bill's still at it!!
Re: Bill's still at it!!
So I guess there's still hope for me then.We have a circle track guy in his late 70's.So Bill's running in the 9's at 140+ at his age...with a stick.How awesome is that!! Kinda wondering about the setup,though. 770 horse out of a 400 inch SBF,pump gas no less,just doesn't add up.He is winding it up pretty tight but there has to be something else going on there.
Re: Bill's still at it!!
Fred, thanks for posting the link! That is awesome that Bill is still living the dream.
Re: Bill's still at it!!
yes,you can'i help but think who wrote the spec's on this article ????///OL POP is on his side,don't take me wrong,,I'm almost 72,,I hope that I am that tough in 10 yrs...so he is a heroe for sure....POPvicegrip wrote:So I guess there's still hope for me then.We have a circle track guy in his late 70's.So Bill's running in the 9's at 140+ at his age...with a stick.How awesome is that!! Kinda wondering about the setup,though. 770 horse out of a 400 inch SBF,pump gas no less,just doesn't add up.He is winding it up pretty tight but there has to be something else going on there.
pop/glenda
Re: Bill's still at it!!
Seen the car run when I was out to Mission to watch Roy and Brian run in 2012.
Ran 9s then, pulled a little trailer to the track with his stuff from the island.
On and off the ferry through Vancouver's insane traffic and an hour on the highway to the track.
Then change tires, drop exhaust etc,,, MAN, kinda shuts down a few excuses,,,EH!
FRED
Ran 9s then, pulled a little trailer to the track with his stuff from the island.
On and off the ferry through Vancouver's insane traffic and an hour on the highway to the track.
Then change tires, drop exhaust etc,,, MAN, kinda shuts down a few excuses,,,EH!
FRED
Re: Bill's still at it!!
Inspiration for all- Never quit living the dream.
Only use the brakes to stop and get gas.
Projects
65 Comet 421Stroker
93 Mark VIII Supercharged w/Fogger
70 Torino GT
Projects
65 Comet 421Stroker
93 Mark VIII Supercharged w/Fogger
70 Torino GT
Re: Bill's still at it!!
I traded Bill for the 331 rotating assembly out of the comet he rolled in Port Alberni for a set of doors for his new comet. Later I gave him a wiring harness and tail lights. The old comet was running 11.30s the day it rolled. Bill's comet inspired me in my late teens and early 20s to buy a 65.
Roger
Roger
Re: Bill's still at it!!
I traded Bill for the 331 rotating assembly out of the comet he rolled in Port Alberni for a set of doors for his new comet. Later I gave him a wiring harness and tail lights. The old comet was running 11.30s the day it rolled. Bill's comet inspired me in my late teens and early 20s to buy a 65.
Roger
Yes a double posts as I just got access to my old user name.
Big THANKS Mike
Roger
Yes a double posts as I just got access to my old user name.
Big THANKS Mike
65 comet 7.61@96mph 1/8
Made in Canada, Built for speed.
Tweaked65 on instagram
https://youtu.be/JCVwEitXSi4
Made in Canada, Built for speed.
Tweaked65 on instagram
https://youtu.be/JCVwEitXSi4
Re: Bill's still at it!!
Totally awesome !!
Re: Bill's still at it!!
pulled a little trailer to the track with his stuff from the island.
On and off the ferry through Vancouver's insane traffic and an hour on the highway to the track.
Then change tires, drop exhaust etc,,, MAN,
FRED[/quote]
that"s the part along with shifting it that amazes me ,,,wife has a 94 yro uncle that lives next to us,,he has a 5acre place that he keeps manicured like a public park,all by hisself,brush hogg with tractor ,mows trims everyday,,is never still,,still goes deer hunting,,still shoots a 30-06 rifle never fails to get at least one deer per season,,,still takes a snort or 2 of hard stuff aday..just awsom to watch in the hot sun wearing that big brim straw hat and his long sleeve shirt and overalls sitting on his massey ferg tractor,,,and his name is BILL...must be something in that name !!!....and he drives a 6cyl ford pu,,,,pop
On and off the ferry through Vancouver's insane traffic and an hour on the highway to the track.
Then change tires, drop exhaust etc,,, MAN,
FRED[/quote]
that"s the part along with shifting it that amazes me ,,,wife has a 94 yro uncle that lives next to us,,he has a 5acre place that he keeps manicured like a public park,all by hisself,brush hogg with tractor ,mows trims everyday,,is never still,,still goes deer hunting,,still shoots a 30-06 rifle never fails to get at least one deer per season,,,still takes a snort or 2 of hard stuff aday..just awsom to watch in the hot sun wearing that big brim straw hat and his long sleeve shirt and overalls sitting on his massey ferg tractor,,,and his name is BILL...must be something in that name !!!....and he drives a 6cyl ford pu,,,,pop
pop/glenda
-
- Posts: 349
- Joined: Mon Jan 27, 2014 2:22 pm
- Location: Saskatchewan, Canada
Re: Bill's still at it!!
Never slow down, you never get old, as they say. I work for a grain farmer, and his dad still helps out a lot on the farm at 82 (83?) years of age. Simply amazes me. Still puts in the long hours at harvest that guys 30 years his junior (or 45!) struggle to do. Shows no signs of slowing down either. Someday I'm going to ask him his secret, but clearly part of it is simply not slowing down.
1964 Caliente hardtop, 302/T5/8.8"
Re: Bill's still at it!!
Way to go,Bill.
I have 2 66 comet ragtops but no where near as fast!
If you're ever in tulsa,look me up.
Lige66. Gerry
I have 2 66 comet ragtops but no where near as fast!
If you're ever in tulsa,look me up.
Lige66. Gerry
Re: Bill's still at it!!
Careful guys there is a strange link added to my comment.
Roger
Roger
65 comet 7.61@96mph 1/8
Made in Canada, Built for speed.
Tweaked65 on instagram
https://youtu.be/JCVwEitXSi4
Made in Canada, Built for speed.
Tweaked65 on instagram
https://youtu.be/JCVwEitXSi4